09.04.2013, 15:22
Hello,
I replaced my Euro H4 Headlamps by a pair of Modified ACA headlight.
I now have a Bi xenon (6000k for low beam (xenon bulb) and 4100k for high beam (9005/HB3 halogen bulb).
These headlights are modified by Theradioflyer, that means that the ACA projector is replaced by a Morimoto unit.
Here is the first test (not yet adjusted) - Low beam only
[/IMG]
Bi Xenon (Low & High beam together)
I had some problem, both Headlamp refused to lowered while all lights were turned off...;The only solution to closed them was to push the lever in high beam position to increase the "resistance" in the line.
After several tests, with new Headlamp module, Ballasts I found the solution, actually, the ballast consumption was to low in the system so I replaced them by "No Error" ballast more expensive but efficient.
Now it works perfectly, the look is definitively better and the efficiency is highly improved
Ps: Hi Rouven
I replaced my Euro H4 Headlamps by a pair of Modified ACA headlight.
I now have a Bi xenon (6000k for low beam (xenon bulb) and 4100k for high beam (9005/HB3 halogen bulb).
These headlights are modified by Theradioflyer, that means that the ACA projector is replaced by a Morimoto unit.
Here is the first test (not yet adjusted) - Low beam only
[/IMG]
Bi Xenon (Low & High beam together)
I had some problem, both Headlamp refused to lowered while all lights were turned off...;The only solution to closed them was to push the lever in high beam position to increase the "resistance" in the line.
After several tests, with new Headlamp module, Ballasts I found the solution, actually, the ballast consumption was to low in the system so I replaced them by "No Error" ballast more expensive but efficient.
Now it works perfectly, the look is definitively better and the efficiency is highly improved
Ps: Hi Rouven