Motor Anzugsmomente Silverado 4x4

[two-lane]

Welche "Motoranzugsdrehmomente" genau ?

Der Motor sollte ein Gen I SBC (mit TBI) sein.
...auch mit den "Motoranzugsdrehmomenten" des SBC...

two-lane


Edit, eine Auswahl:

SBC Torque specs:
Size USE TORQUE Lubricant

1/4 - 20 Oil pump cover 80 lb. in. (oil, unless noted)
Oil pan to front cover 80 lb. in.
Front cover 75 lb. in.
Rocker cover 25 lb. in. antiseize


5/16 - 18 Oil Pan bolt 165 lb. in.
Camshaft Sprocket 20 lb. ft.



3/8 - 16 Intake manifold 25 lb. ft.
Water Outlet 20 lb. ft.
Exhaust manifold 25 lb. ft. antiseize
Clutch pressure plate 35 lb. ft.
Distributor clamp 20 lb. ft.
Flywheel housing 30 lb. ft.
Flywheel 60 lb. ft. Locktite
Water pump 30 lb. ft. Sealant

3/8 - 24 Rod bolts 50 lb. ft. Locktite (0.006" stretch, frequently 55-60 lb. ft. required to obtaim proper stretch)
11/32 early rod bolts 35 lb. ft Locktite (0.005" stretch)

7/16 - 14 Head bolts 65 lb. ft. Sealant
Rocker arm STUD 50 lb. ft.
Oil pump 65 lb. ft.

1/2 - 13 Main bearing (inner) 70 lb. ft.
(outter) 65 lb. ft.

1/2 - 20 Harmonic balancer 85 lb. ft.

Oil filter canister 25 lb. ft.
Oil drain plug 20 lb. ft.

1/2 - 14 Temp sender unit 20 lb. ft.

14mm Spark plugs (13/16 hex) 25 lb. ft.
( 5/8 hex) 15 lb. ft.